For Immediate Release

 

BEST LOW-COST IMPROVED TRIGGER CONTROL

FOR THE AR-15 PLATFORM–EVER

Las Vegas, NV, March 2, 2015 Accu-Grip www.accu-grip.net announces a remarkable low-cost patented and patent pending improvement to the AR-15 platform that will actually make shooting more comfortable and inherently much more accurate.  www.accu-grip.net

Well first, who doesn’t make something for the AR platform anymore? True, but much of the gear is just flat-out show biz, not something that’s actually useful. This is!

Accu-Grip

The key to accurate and quick shooting is trigger control. Trigger control can be greatly improved by correct contact between the trigger finger and trigger. The basic trigger length of an AR is just 2.25 inches which is why most shooters position their hand awkwardly or have their trigger finger dangling out the other side of the trigger guard. NO MORE!

 

The Accu-Grip allows the shooter to lengthen and incrementally adjust the critical grip-to-trigger contact–up to 3.25 inches if desired (above image shows 5/8 inch). While that may not sound like much, any experienced shooter will tell you it is huge and can greatly improve critically important trigger control resulting in more accurate shooting.

Installation takes about five minutes. Accu-Grip fits all MILSPEC and factory lowers and comes with the necessary hardware and Allen wrench for installation. After installation, adjusting the grip to fit the individual shooter takes a few seconds. Movement of the grip is accomplished in 1/10-inch incremental positive hold adjustments and, of course, the grip may be adjusted as many times as the shooter wishes.

MATERIAL: The patented, all American-made Accu-Grip is molded with DuPont Zytel resin and long strand glass fibers, making it incredibly tough–tougher than the original grips.

COLORS: Accu-Grips are available in black, dark earth, OD green and desert sand. Other custom colors can be created in quantity on request.

PRICE: $39.95 MSRP.

BOTTOM LINE: People will spend a bunch of money getting triggers reworked, attaching cheese graters and doing other nifty stuff to the AR, but AR grip-to-trigger length improvement may be more important to better trigger control function and resulting shooter accuracy than anything else done on these rifles for under $500.00. Please see below Additional Background information.

Accu-Grip

713 Merialdo Lane

Las Vegas NV 89145

 www.accu-grip.net 

Media Professionals

For further information regarding the Accu-Grip

please contact

Shults Media Relations, LLC at

 greatstuff@acsol.net 

Additional background information: When installed there is a gap behind the fully enclosed receiver and front edge of the grip where the thumb wraps. This gap increases as the grip length is increased. While different looking from the norm (What’s new with any of the stuff we attach to ARs?) it means nothing in operation or keeping the gun “dust free.”

We are all shooters at our PR firm with some having held NRA National Records. While it is our job to inform you of neat new products we can tell you that this single improvement to our ARs was astonishing. Our staff’s ability to place accurate hits at any speed was dramatically improved by everyone by an easy 25 percent and the trigger feel was 100 percent better. The Improved trigger pull position made 7-pound triggers feel like 3-pounds due to the resulting much improved trigger finger leverage and location.

To better understand this unique grip and why it can really help with accurate shooting, think of length of pull. As you know, length of pull with a rifle or shotgun is critical for accurate and comfortable shooting. Length of pull as applied normally is the distance between the rear of the butt or recoil pad of the rifle or shotgun to the center point of the trigger. This distance allows the shouldered firearm to “best fit” from the shooter’s shoulder to the trigger–length of pull is quite simply an overall trigger reach adjustment. Factory long arms have a generalized distance designed to fit the average person (like factory ARs). Many custom gun makers will measure and build a precise pull length to fit the individual shooter, and many competition long arms and some sniper rifles have fully adjustable pull lengths.

Now apply that concept to the vertical grip of the AR (obviously different from a normal sporting rifle). The conventional AR grip forces the shooter to have their trigger finger a certain distance from the grip–like it or not. The AR vertical hand grip does NOT allow shooters to move their trigger finger hand back or around (like the stock of a conventional hunting-style rifle might, for example). With the AR, you are stuck! On top of that, the 54-year-old AR trigger-to-grip distance is short so that smaller people can use the firearm (designed for military use, it has to fit everyone). Now comes the Accu-Grip solution!

The Accu-Grip allows this grip-to-trigger-surface distance to be opened up so that Joe and Jane Average-or-larger shooter can function the trigger much more efficiently. Improved reach, feel and trigger manipulation control means more accurate and even quicker shooting. We could call this the trigger length of trigger pull (TLTP), a huge improvement at low cost. A serious win win.